If you have a propane tank that you use to hold the fuel to keep your home warm and your water hot, you will want to make sure that you are doing everything you can in order to keep the tank free of leaks. Even the smallest of leaks can cause a lot of trouble, as you might find that you are going to run out of fuel sooner than expected. If you would like to make sure that you are well aware of how you can determine if there is a leak in your propane tank, you will want to continue reading:
Look For Bubbles In The Supply Line
One of the places that can easily develop pin holes, which will cause propane to leak out of the system, is the supply line and where those lines connect to the tank. Use a clean wash cloth and wet it with soapy water. Gently rub that soapy cloth all over the supply line and over any connector pieces. Step back and wait a moment. If there is a problem, you will start to see bubbles forming. If there aren't any bubbles forming, it is safe to say that that area is free of leaks at the moment.
Look For Propane Dripping From Under The Tank
This might be hard to spot by simply glancing under the tank, unless the leak is rather dramatic. Therefore, you will want to take a piece of cardboard or an old white bath towel or sheet, and lay it under the tank. Make sure that you are securing the ends in place with some stone or brick. This will prevent your material from blowing away in the wind. Leave it there for the entire night and then take a look at it in the morning. If there are leaks coming from the tank, you will see spots of propane on the cardboard, towel, or sheet.
Now that you have a better idea as to how you can determine if there is a leak in your propane tank, you will want to get to work looking for such leaks. It's great if you don't find any leaks at the moment. Just don't let that positivity cause you to get so relaxed about the condition of the propane tank that you do not look at it again for a long time. Remember, leaks can happen at any point in time, so it is crucial that you are doing everything you can to keep checking on it. This way, if you are able to catch the leak soon, you won't have to worry about losing too much fuel before you have a chance to stop and fix the leak.
Share22 July 2019
Can furnace repairs be made by the average DIYer? If you know a little about what you are doing, is it possible to avoid the expense of having a professional come out to take care of any problems that you are having? My blog is all about furnace safety and repair. You will learn a few things that you can do on your own and advice for when to call in the professional repair technician to assist with the repairs. By the time you reach the end, you will have a better understanding of what you can and should not do on your own.